Upgradation Aircraft model tracker out of control alarm

Product Name: Upgrade Aircraft Tracking Alarm
Product size: 17.2 * 22.8mm
Product weight: 3.7g with thread
Applicable systems: AM/FM PPM, FM/PCM
Applicable voltage: 3V~5.5V, receiver power supply can be used
Static current: less than 1MA (buzzer does not sound and light does not light up)
Maximum working current: 72MA (buzzer sounds and light flashes)
Buzzer: 83~86DB
Small size, light weight, blue light beads, clearer alarm
Unique whistle sound helps to distinguish ambient noise
Microprocessor control, strong anti-interference

1. Connect correctly according to the diagram, just connect the wire to one AuX (such as Gear) of the receiver.
2. When the power is turned on, the buzzer will emit three beeps and the blue light bulb will flash three times.
3. Turn the switch of the Aux channel upwards, and the buzzer will continue to drip It keeps ringing and accompanied by a blue light bead flashing. When the Aux channel switch is turned downwards, the buzzer stops alarming.
4. Refer to Figure 2-1, black represents GND, red represents VCC, and gray represents signal lines.

5. Uncontrolled alarm function:
1: When the transmitter is turned off or the receiver loses signal for 1 minute, it enters an alarm state.
2: The transmitter is turned on, but the remote control joystick is not operated for 1 minute. The receiver does not receive any signal changes and enters an alarm state.
6. Turn on the transmitter and simultaneously operate the throttle lever to clear the alarm.